Smart Home

Smart Home is an IoT application that enables its users to control various home appliances. Smart Home combines technology and services to facilitate your better living quality, enhanced security and energy efficiency through IoT experience. Elements of a Smart Home Automation system includes networking of home appliances and a Smartphone app. Home appliances networking is done by using BLE (Bluetooth Low Energy). Smart Gateway works as the local broker and communicates with the app through MQTT protocol. BLE enabled home appliances(Smart Switch, Smart RGB, Smart Curtain etc) can be controlled or pre-programmed through BLE supported mobile.

MINIMUM ANDROID VERSION: 4.4.2

SMARTPHONE MUST BE BLE SUPPORTED

MAIN FEATURES

1. Home and Room management

2. Smart Switch Control

a. Assigning loads to Smart Switch (Load types: Non dimmable Light, Dimmable Light, Fan )

b. Load Control using app: On/Off, Dimming

c. Manual dimming from hardware

3. RGB Light Control

a. On/Off

b. Color and brightness changing

c. Party mode

d. Saving favorite colors

4. Integration with smart gateway and controlling devices through internet

5. Server integration

6. Multiple user control

7. Camera live stream (Supported DVR: Hikvision)

8. RGB firmware reset

KNOWN ISSUES

1. Backup restore in BLE mode has issues

2. Multiple user support is not fully stable yet

3. Switch version 00 is not compatible in IoT mode

4. Connection icon doesn’t spin while connecting in IoT mode

5. Server auto syncing not implemented yet

6. Random crash issue

7. Channel configuration from dashboard has an issue (Rare case)

8. Not requesting load status after bridge re connection, user needs to pull down

9. Shows mqtt 3G connected even though gateway configuration was not successful

10. RGB firmware update doesn’t work in some android phones. Best works on Nexus 5

Smart Home adalah sebuah aplikasi IOT yang membolehkan pengguna untuk mengawal pelbagai peralatan rumah. Smart Home menggabungkan teknologi dan perkhidmatan untuk memudahkan kualiti hidup, keselamatan dan tenaga dipertingkatkan kecekapan anda dengan lebih baik melalui pengalaman IOT. Unsur-unsur sistem Smart Home Automation termasuk rangkaian peralatan rumah dan aplikasi telefon pintar. Peralatan rumah rangkaian dilakukan dengan menggunakan BLE (Bluetooth Tenaga Rendah). Smart Gateway bekerja sebagai broker tempatan dan berkomunikasi dengan aplikasi melalui protokol MQTT. BLE peralatan rumah yang aktif (Switch Smart, Smart RGB, Smart Curtain dan lain-lain) boleh dikawal atau pra-diprogramkan melalui BLE disokong mudah alih.

MINIMUM VERSION ANDROID: 4.4.2

SMARTPHONE MESTI ble DISOKONG

CIRI-CIRI UTAMA

1. rumah dan pengurusan Bilik

2. Kawalan Suis Smart

     a. Memberikan beban kepada Tukar Smart (jenis beban: Light tidak boleh dimalapkan, boleh dimalapkan cahaya, Fan)

    b. Kawalan beban menggunakan app: On / Off, Dimming

    c. dimming Manual dari perkakasan

3. RGB kawalan cahaya

    a. On / Off

    b. Warna dan kecerahan yang berubah-ubah

    c. mod parti

    d. Menyimpan warna kegemaran

4. Integrasi dengan pintu masuk pintar dan peranti mengawal melalui internet

integrasi 5. Server

6. kawalan pengguna Pelbagai

7. Kamera aliran hidup (Disokong DVR: Hikvision)

8. RGB semula firmware

ISU YANG DIKETAHUI

1. Backup memulihkan dalam mod BLE mempunyai isu-isu

2. sokongan pengguna Multiple tidak stabil sepenuhnya lagi

3. Tukar versi 00 tidak serasi dalam mod IOT

icon 4. sambungan tidak berputar ketika menyambung dalam mod IOT

5. Server auto penyegerakan tidak dilaksanakan lagi

6. isu kemalangan rawak

7. Channel tatarajah daripada papan pemuka mempunyai isu (kes Rare)

8. status beban Tidak meminta selepas jambatan semula sambungan, pengguna perlu tarik ke bawah

9. Rancangan mqtt 3G disambungkan walaupun konfigurasi pintu masuk tidak berjaya

10. RGB firmware update tidak boleh digunakan dalam sesetengah telefon android. kerja-kerja terbaik pada Nexus 5